- Fitting Position: Rear Axle
- Diameter [mm]: 180
- Width [mm]: 30
Incl. VAT 0%
18.47 EUR
1-24 of 161
1809 OE number by DS
Total number of products found: 161
| DS | 1809 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Number of circuits: 4
- Recommended change interval [km]: 160,000
- Connector/Clamp: Connector may need adjustment
Incl. VAT 0%
37.25 EUR
- Cable Length [mm]: 650
- Lambda Sensor: Planar probe
- Lambda Sensor: Heated
Incl. VAT 0%
41.89 EUR
- Fitting Position: Rear Axle
- Diameter [mm]: 180
- Width [mm]: 32
- Brake System: BOSCH
Incl. VAT 0%
10.36 EUR
- for OE number: 03D906265
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 605
Incl. VAT 0%
48.61 EUR
Incl. VAT 0%
66.53 EUR
- Thread Size: M12x1,5
- Spanner Size: 19
- Corresponds to the original part in colour: red
- Corresponds to the original part in colour: blue
Incl. VAT 0%
5.99 EUR
- Thread Size: M12x1,5
- Spanner Size: 19
- Corresponds to the original part in colour: red
- Corresponds to the original part in colour: blue
Incl. VAT 0%
6.31 EUR
- Fitting Position: Rear Axle
- Test Mark: ECE R-90
- Supplementary Article/Supplementary Info: with lever
- Brake System: Lockheed
- Diameter [mm]: 180
Incl. VAT 0%
13.08 EUR
- Water Pump Type: for v-ribbed belt use
- Water pump impeller material: Cast Iron
- Supplementary Article/Supplementary Info: with gaskets/seals
- Supplementary Article/Info 2: with studs
Incl. VAT 0%
45.32 EUR
- Eject Force [N]: 420
- Length [mm]: 485.5
- Stroke [mm]: 184.5
Incl. VAT 0%
20.30 EUR
- Number of connectors: 2
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
Incl. VAT 0%
5.04 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with seal
- Thread Size: M6
- Number of threaded holes: 3
- Impeller Diameter [mm]: 67.5
Incl. VAT 0%
34.94 EUR
- Thickness [mm]: 92
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 58
- Outer Diameter [mm]: 47
- Fitting Position: Front Axle
Incl. VAT 0%
17.33 EUR
- paired article number: 01811
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Fitting Position: Lower
Incl. VAT 0%
27.93 EUR
- Manufacturer Restriction: AP LOCKHEED
- Brake diameter, inside [mm]: 180
- Width [mm]: 32
- Test Mark: E9-90R-01116/1667
- SVHC: No information available, please contact the manufacturer!
Incl. VAT 0%
21.50 EUR
- Length [mm]: 650
- Number of pins: 4
- Socket colour: black
- Technical Information Number: Universal 77004
Incl. VAT 0%
40.77 EUR
Incl. VAT 0%
6.10 EUR
- Cable Length [mm]: 700
- Number of pins: 2
- Housing Colour: black
- Sensor Type: Inductive Sensor
Incl. VAT 0%
21.61 EUR
- Length [mm]: 650
- Number of circuits: 4
Incl. VAT 0%
69.15 EUR
Incl. VAT 0%
37.81 EUR
- Manufacturer Restriction: SANDEN-EQUIVALENT
- Supplementary Article/Info 2: with PAG compressor oil
- Pulleys: with V-ribbed belt pulley
- Compressor ID: SD7V16
- Voltage [V]: 12
Incl. VAT 0%
172.21 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with gaskets/seals
- Impeller Diameter [mm]: 70
Incl. VAT 0%
63.43 EUR
- Water Pump Type: for v-ribbed belt use
- Water pump impeller material: Plastic
- Seal Material: Paper
- Material: Cast Aluminium
- Number of blades/vanes: 7
Incl. VAT 0%
28.56 EUR
