- Number of connectors: 2
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
Incl. VAT 0%
4.93 EUR
25-48 of 161
1809 OE number by DS
Total number of products found: 161
| DS | 1809 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Width [mm]: 32
- Outer Diameter [mm]: 180
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Weight [kg]: 0.86
Incl. VAT 0%
18.76 EUR
- Lambda Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 650
- Number of circuits: 4
- Weight [kg]: 0.14
Incl. VAT 0%
37.58 EUR
- Lambda Sensor: Heated
- External Thread Size: M18 x 1,5
- Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 620
Incl. VAT 0%
37.91 EUR
- Length [mm]: 445
- Stroke [mm]: 175
- Eject Force [N]: 640
- Housing Diameter [mm]: 18
- Weight [kg]: 0.23
Incl. VAT 0%
5.27 EUR
- Test Mark: ECE-R90
- Width [mm]: 30
- Inner brake drum diameter [mm]: 180
Incl. VAT 0%
16.85 EUR
- Lambda Sensor: Heated
- External Thread Size: M18 x 1,5
- Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 620
Incl. VAT 0%
37.02 EUR
- Fitting Position: before catalytic converter
- Fitting Position: after catalytic converter
- Lambda Sensor: Planar probe
- Number of pins: 4
- Cable Length [mm]: 650
Incl. VAT 0%
50.78 EUR
- Length [inch]: 25.59
- Cable Length [mm]: 650
- Number of pins: 4
- Lambda Sensor: Lambda Sensor
- Specification: Isolated Ground
Incl. VAT 0%
37.84 EUR
- Length [mm]: 485
- Fabrication Number: AE-KA-015
- Extention Force [N]: 420
Incl. VAT 0%
3.01 EUR
- Oxygen Sensor: Switching-type Oxygen Sensor
- Oxygen Sensor: Thread pre-greased
- Fabrication Number: ESL-UV-001
Incl. VAT 0%
12.98 EUR
- Oxygen Sensor: Regulating Sensor
- Length [mm]: 605
- Fabrication Number: ESL-VW-006
Incl. VAT 0%
21.61 EUR
- Fitting Position: Front Axle
- Thickness [mm]: 19.2
- Width [mm]: 132.9
- Height [mm]: 58.5
- Wear Warning Contact: with acoustic wear warning
Incl. VAT 0%
19.91 EUR
- Fitting Position: Rear Axle
- Width [mm]: 32
- Brake System: AP LOCKHEED
- Inner brake drum diameter [mm]: 180
- Weight [kg]: 1.06
Incl. VAT 0%
14.27 EUR
- Fitting Position: Front Axle
- Required quantity: 1
- Weight [g]: 280
Incl. VAT 0%
6.96 EUR
- Compressor ID: SD7V16
- Compressor Oil: PAG 46
- Refrigerant: R 134a
- Number of ribs: 6
- Belt Pulley Ø [mm]: 125
Incl. VAT 0%
213.94 EUR
- Fitting Position: Rear Axle
- Diameter [mm]: 180
- Width [mm]: 32
- Supplementary Article/Supplementary Info: with lever
- Brake System: Bosch
Incl. VAT 0%
15.18 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with seal
- Number of blades/vanes: 7
- Impeller Diameter [mm]: 69.6
- Water Pump Type: for v-ribbed belt use
Incl. VAT 0%
38.94 EUR
- Operating Mode: Mechanical
- reinforced version:
- Supplementary Article/Supplementary Info: with seal
- Number of blades/vanes: 8
- Impeller Diameter [mm]: 69
Incl. VAT 0%
30.30 EUR
- Cone Size [mm]: 16.5
- Supplementary Article/Info 2: with ball joint
- Supplementary Article/Info 2: with rubber mount
- Material: Steel
- Length [mm]: 309
Incl. VAT 0%
21.41 EUR
- Width [mm]: 32
- Outer Diameter [mm]: 180
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Weight [kg]: 0.86
Incl. VAT 0%
21.04 EUR
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.06
Incl. VAT 0%
16.24 EUR
- Number of connectors: 2
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
Incl. VAT 0%
11.35 EUR
- Material: Cast Iron
- Bore Ø [mm]: 19.05
- Thread Size: 10 x 1 (2)
Incl. VAT 0%
43.90 EUR
