- Length [mm]: 161
- Width [mm]: 170
- Height [mm]: 123
Incl. VAT 0%
26.03 EUR
1-24 of 60
57344 - Relay, main current OE number by MASSEY FERGUSON
Total number of products found: 60
| MASSEY FERGUSON | 57344 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Brake Disc Type: Vented
- Number of Holes: 4
- Test Mark: E1 90R-02C0277/1427
- Supplementary Article/Info 2: without wheel bearing
- Supplementary Article/Info 2: without ABS sensor ring
Incl. VAT 0%
16.59 EUR
- Outer Diameter [mm]: 259
- Brake Disc Thickness [mm]: 20.7
- Minimum thickness [mm]: 17.7
- Brake Disc Type: Vented
- Number of Holes: 4
Incl. VAT 0%
15.97 EUR
- for OE number: 31911KRN731
- Connector type: Removable SAE
- Diameter [mm]: 10
- Spanner Size: 16
- Tightening Torque [Nm]: 12
Incl. VAT 0%
33.64 EUR
- Observe technical data:
Incl. VAT 0%
45.83 EUR
- Supplementary Article/Info 2: with resistor
- Supplementary Article/Supplementary Info: with holder
- Protection Type (IP Code): IP54
- Voltage [V]: 12
- Capacity at 12V: 50A
Incl. VAT 0%
3.88 EUR
Incl. VAT 0%
13.53 EUR
- Fitting Position: Front Axle Left
- External Thread [mm]: M10x1,25
- Supplementary Article/Info 2: with self-locking nut
Incl. VAT 0%
6.04 EUR
- Fitting Position: Front Axle Left
- Length [mm]: 145
- Thread Size 1: M10x1,25
- Thread Size 2: M14x1,5
- replacement in pairs recommended:
Incl. VAT 0%
7.34 EUR
- Height [mm]: 32
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 86
- Material: Rubber/Metal
- Fitting Position: Upper
Incl. VAT 0%
4.12 EUR
- paired article number: 70 71 0034
- External Thread Size: M10 x 1,25
- Fitting Position: Front Axle Left
- Weight [kg]: 0.4
- Supplementary Article/Info 2: with self-locking nut
Incl. VAT 0%
7.33 EUR
- Brake Disc Type: Vented
- Outer Diameter [mm]: 259
- Brake Disc Thickness [mm]: 20.6
- Minimum thickness [mm]: 17.7
- Centering Diameter [mm]: 61
Incl. VAT 0%
21.28 EUR
- Inner Diameter [mm]: 16
- Height [mm]: 32
- Outer Diameter [mm]: 86
- Material: Rubber/Metal
- Fitting Position: Upper
Incl. VAT 0%
3.69 EUR
- Material: Rubber/Metal
- Fitting Position: Front Axle
- Weight [kg]: 0.525
- Supplementary Article/Info 2: without ball bearing
- Supplementary Article/Info 2: with fastening material
Incl. VAT 0%
13.16 EUR
- paired article number: 12473
- External Thread Size: M10 x 1,25
- Fitting Position: Front Axle Left
- Weight [kg]: 0.4
- Supplementary Article/Supplementary Info: with lock nuts
Incl. VAT 0%
6.76 EUR
- Weight [kg]: 0.6
- Required quantity: 1
- Internal Thread [mm]: 14x1,5
- Thread Type: with right-hand thread
- paired article number: L15113
Incl. VAT 0%
10.18 EUR
- Manufacturer Restriction: DENSO
- Compressor ID: 10PA
- Compressor ID: 7SB / 7SBU
- Voltage [V]: 12
Incl. VAT 0%
14.08 EUR
- Operating Mode: Hydraulic
- Weight [kg]: 0.222
Incl. VAT 0%
37.42 EUR
- Thread Size: FM14X1.5 RHT
- Cone Size [mm]: 11.9
- Length [mm]: 144
- Thread Size 2: MM10X1.25 RHT
- paired article number: 230078
Incl. VAT 0%
7.31 EUR
- Thickness [mm]: 54
- Outer Diameter [mm]: 32
- Operating Mode: Hydraulic
- Weight [kg]: 0.24
- Observe service information:
Incl. VAT 0%
41.58 EUR
- Fitting Position: Rear
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 0.45
Incl. VAT 0%
43.63 EUR
- Material: Rubber/Metal
- Fitting Position: Front Axle
- Weight [kg]: 0.57
- Supplementary Article/Supplementary Info: with attachment material
- Supplementary Article/Info 2: without ball bearing
Incl. VAT 0%
17.00 EUR
- Test Mark: ECE-R90
- Height [mm]: 41
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20.7
- Outer Diameter [mm]: 259
Incl. VAT 0%
20.62 EUR
- Fitting Position: Front Axle
- Length 2 [mm]: 145
- Length [mm]: 160
- Internal Thread 1 [mm]: M 14x1,5 mm
- External Thread 2 [mm]: M 10x1,25 mm
Incl. VAT 0%
2.45 EUR
