- Sensor Type: Inductive Sensor
- Number of pins: 3
- Cable Length [mm]: 350
Incl. VAT 0%
5.93 EUR
1-24 of 97
550007 OE number by OPEL, VAUXHALL
Total number of products found: 97
| OPEL | 5 50 007 |
| VAUXHALL | 550007 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Temperature range from [°C]: 87
- Temperature range to [°C]: 77
- Thread Size: M22x1,5
- Spanner Size: 29
Incl. VAT 0%
6.67 EUR
- Length [mm]: 330
Incl. VAT 0%
25.09 EUR
- Voltage [V]: 12
- Resistor [Ohm]: 370
- Tolerance [%]: 10
- Cable Length [mm]: 330
- Sensor Type: Inductive Sensor
Incl. VAT 0%
14.68 EUR
- Compressor ID: SD7V16
- Compressor Oil: PAG 46
- Refrigerant: R 134a
- Number of ribs: 6
- Belt Pulley Ø [mm]: 119
Incl. VAT 0%
202.18 EUR
- Number of connectors: 3
- Cable Length [mm]: 255
- Weight [kg]: 0.047
Incl. VAT 0%
11.83 EUR
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Voltage [V]: 12
- Connector Shape: angled
- Supplementary Article/Info 2: with cable
Incl. VAT 0%
19.78 EUR
- Width of castor bearing surface [mm]: 22
- Width [mm]: 50
- Inner Diameter [mm]: 8
- Outer Diameter [mm]: 61
- Material: Plastic
Incl. VAT 0%
15.56 EUR
- Width [mm]: 19
- Number of Teeth: 135
- Supplementary Article/Info 2: with screw
- Belts: with rounded tooth profile
- Weight [kg]: 0.3
Incl. VAT 0%
28.97 EUR
- Width [mm]: 19
- Number of Teeth: 135
- Belts: with rounded tooth profile
- Weight [kg]: 0.1
- Observe service information:
Incl. VAT 0%
7.04 EUR
- Length [mm]: 1,005
- Outer Diameter [mm]: 52
- Internal Thread Size: M30 x 1,5
- External Thread Size: M20 x 1,5
- Cone Size [mm]: 26
Incl. VAT 0%
78.20 EUR
- Switch point from [°C]: 88
- Switch point to [°C]: 79
Incl. VAT 0%
5.78 EUR
- Number of pins: 3
- Connector Shape: rectangular
Incl. VAT 0%
17.96 EUR
- Width [mm]: 30
- Outer Diameter [mm]: 180
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Weight [kg]: 1.14
Incl. VAT 0%
17.72 EUR
- Cable Length [mm]: 255
- Number of pins: 3
Incl. VAT 0%
12.29 EUR
- Width [mm]: 19
- Water pump impeller material: Metal
- Number of Teeth: 135
- Belts: with rounded tooth profile
- Weight [kg]: 1.16
Incl. VAT 0%
54.68 EUR
- Width [mm]: 19
- Number of Teeth: 135
- Belts: with rounded tooth profile
- Weight [kg]: 1.04
Incl. VAT 0%
52.70 EUR
- Fitting Position: Inlet
Incl. VAT 0%
54.40 EUR
- Number of connectors: 3
- Cable Length [mm]: 255
- Weight [kg]: 0.047
Incl. VAT 0%
12.16 EUR
- Material: Aluminium
- Core Length [mm]: 640
- Core Width [mm]: 488
- Core Depth [mm]: 16
- Radiator type: Brazed cooling fins
Incl. VAT 0%
99.72 EUR
- Voltage [V]: 12
- Length [mm]: 285
- Number of pins: 3
- Weight [kg]: 0.09
- Operating Mode: Electric
Incl. VAT 0%
9.53 EUR
- remanufactured spare part (REMAN):
- Exchange Part without deposit:
- Voltage [V]: 12
- Rated Power [kW]: 2.2
- Number of Teeth 1: 9
Incl. VAT 0%
155.63 EUR
- Forward- /Backflow: Supply Line
- Additionally required articles (article numbers): 115-990
- Additionally required articles (article numbers): 989-10-004
- Additionally required articles (article numbers): 989-12-002
- Alternative Repair Kit: 611-826Z
Incl. VAT 0%
20.08 EUR
- Forward- /Backflow: Supply Line
- Supplementary Article/Info 2: with mounting kit
Incl. VAT 0%
21.94 EUR
