- Brake Type: Disc Brake
- Length [mm]: 740
- Number of wear indicators [per axle]: 1
Incl. VAT 0%
6.65 EUR
25-48 of 86
51165 OE number by STANDARD AUTOMOBILE
Total number of products found: 86
| STANDARD AUTOMOBILE | 51165 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Fitting Position: 1st rear axle right
- Sensor Type: Passive sensor
- for OE number: 89545-0K060
Incl. VAT 0%
11.72 EUR
- Width of castor bearing surface [mm]: 31.5
- Width [mm]: 26
- Outer Diameter [mm]: 75
- Material: Plastic
- Number of ribs: 6
Incl. VAT 0%
16.46 EUR
- Width [mm]: 26
- Diameter [mm]: 75
- Weight [kg]: 0.237
Incl. VAT 0%
4.08 EUR
- Fitting Position: Front Axle
Incl. VAT 0%
13.60 EUR
- Pressure [bar]: 1.4
- Thread Size: M10 x 1
- Number of pins: 1
- Technical Information Number: circuit N.O.
Incl. VAT 0%
3.45 EUR
- Material: Aluminium
- Diameter 1 [mm]: 20.6
Incl. VAT 0%
29.76 EUR
- Fitting Position: 1st front axle on both sides
Incl. VAT 0%
4.72 EUR
- Length [mm]: 130
- Thread Size 1: M8X1,25
Incl. VAT 0%
8.44 EUR
- Piston Diameter 1 [mm]: 20.6
- Brake System: TRW
- Length 2 [mm]: 139
- Length 1 [mm]: 51
- Thread Size 1: 2x M10x1.0
Incl. VAT 0%
59.06 EUR
- for OE number: 344727
- Fitting Position: Front Axle
- Material: Rubber
- Material: PU (Polyurethane)
- Weight [g]: 462
Incl. VAT 0%
13.66 EUR
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye
- Shock Absorber Mounting Type: Top pin
Incl. VAT 0%
33.88 EUR
- Switch Pressure [bar]: 1.4
- Thread Size: M10x1
- Supplementary Article/Supplementary Info: with seal
- Colour: black
- Number of pins: 1
Incl. VAT 0%
2.70 EUR
- Fitting Position: Rear Axle
- Shock Absorber Type: Oil Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye
- Shock Absorber Mounting Type: Top pin
Incl. VAT 0%
25.93 EUR
- Thickness [mm]: 1.2
- Length [mm]: 61
- Width [mm]: 94
Incl. VAT 0%
6.35 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with seal
- Number of blades/vanes: 6
- Impeller Diameter [mm]: 70
- Water Pump Type: for v-ribbed belt use
Incl. VAT 0%
25.20 EUR
- paired article number: ADBP710017
- Number of connectors: 2
- Resistor [Ohm]: 1,370
- Fitting Position: Rear Axle Right
- Cable Length [mm]: 760
Incl. VAT 0%
27.19 EUR
- Height [mm]: 225
- Inner Diameter [mm]: 35
- Outer Diameter [mm]: 79
- Inner Diameter 1 [mm]: 35
- SVHC: No SVHC present!
Incl. VAT 0%
14.13 EUR
- Length [mm]: 200
- Width [mm]: 94
- Fitting Position: Front Axle
- Weight [kg]: 0.358
Incl. VAT 0%
24.21 EUR
- Thread Size: M8x1,25
- Length [mm]: 130
- Length [mm]: 45
- Required quantity: 2
Incl. VAT 0%
1.49 EUR
- Corresponds to the original part in colour: black
- Pressure [bar]: 1.4
- Thread Size: M 10 x 1
Incl. VAT 0%
3.02 EUR
- Bore Ø [mm]: 25
- Brake System: Lucas
- Thread Size 1: M10x1
- Thread Size 2: M12x1
