Cart
0.00 EUR

39510 OE number by SCHWARZMÜLLER

Total number of products found: 30

SCHWARZMÜLLER 39510
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.

  • Thickness [mm]: 70
  • Inner Diameter [mm]: 47
  • Outer Diameter [mm]: 78
  • Material: Rubber/Metal
  • Fitting Position: Front Axle
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
16.32 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Fitting Position: Rear Axle
  • Spring Design: Coil Spring
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
23.96 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Length [mm]: 149
  • Outer Diameter [mm]: 86
  • External Thread Size: M22 x 1,5
  • External Toothing wheel side: 28
  • Internal Toothing wheel side: 23
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
28.54 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Fuel Type: Petrol
  • Supplementary Article/Info 2: without pressure sensor
  • Supplementary Article/Supplementary Info: without gasket/seal
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
103.16 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Warranty: 3 years warranty
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
18.76 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Supplementary Article/Supplementary Info: with oil drain plug
  • Supplementary Article/Info 2: without bore for oil level sensor
  • Colour: black
  • Material: Steel
  • Fabrication Number: BMO-HY-500
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
19.69 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Supplementary Article/Supplementary Info: with oil drain plug
  • Supplementary Article/Info 2: without bore for oil level sensor
  • Material: Steel
  • Fabrication Number: BMO-HY-501
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
Incl. VAT 0%
11.56 EUR
Ready for dispatch :
Tomorrow, 18 June, 2026
In stock
  • Operating Mode: Electric
  • Pressure [bar]: 3.5
  • Flow rate [l/min.]: 2
  • Supplementary Article/Supplementary Info: without gaskets/seals
  • Voltage [V]: 13.5
Out of stock
Incl. VAT 0%
140.00 EUR
Out of stock
  • Oil Sump Material: Sheet Steel
  • Section: Lower Section
  • Supplementary Article/Supplementary Info: with oil drain plug
  • Supplementary Article/Supplementary Info: without gasket/seal
Out of stock
Incl. VAT 0%
37.82 EUR
Out of stock
  • Operating Pressure [bar]: 3.5
  • Flow rate [l/h]: 125
  • Injection System: Multi Point Injection (MPI)
  • for article number: 7506996
  • Number of pins: 2
Out of stock
Incl. VAT 0%
120.69 EUR
Out of stock
Scroll to top