Incl. VAT 0%
61.72 EUR
1-24 of 111
27004 OE number by STANDARD AUTOMOBILE
Total number of products found: 111
| STANDARD AUTOMOBILE | 27004 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
Incl. VAT 0%
0.54 EUR
Incl. VAT 0%
1.01 EUR
Incl. VAT 0%
0.86 EUR
- Diameter [mm]: 58
- Height [mm]: 33
Incl. VAT 0%
7.75 EUR
- Service exchange part:
- Voltage [V]: 12
- Rated Power [kW]: 1.4
- Number of mounting bores: 1
- Number of threaded holes: 2
Incl. VAT 0%
81.60 EUR
- Length [mm]: 993
- Outer Diameter [mm]: 50
- Internal Thread Size: M30 x 1,5 RHT
- External Thread Size: M24 x 1,5
- Cone Size [mm]: 30
Incl. VAT 0%
95.18 EUR
- Fitting Position: Front Axle Right
- Fitting Position: Upper
- Cone Size [mm]: 15.8
- Control/Trailing Arm Type: Control Arm
- Thread Size 1: M12X1,5
Incl. VAT 0%
31.21 EUR
- Fitting Position: Front
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Height [mm]: 77
- Inner Diameter [mm]: 12
Incl. VAT 0%
9.46 EUR
- Fitting Position: Upper
- Fitting Position: Right
- Fitting Position: Front Axle
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
Incl. VAT 0%
52.82 EUR
- Width [mm]: 36
- Inner Diameter [mm]: 38
- Outer Diameter [mm]: 74
- Width 2 [mm]: 33
Incl. VAT 0%
19.78 EUR
- Diameter [mm]: 58
- Width [mm]: 33
- Tensioner Pulley Actuation: Manual
Incl. VAT 0%
8.68 EUR
- Length [mm]: 77
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 60.5
- Material: Rubber/Metal
- Fitting Position: Rear Axle
Incl. VAT 0%
20.12 EUR
- Length [mm]: 77
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 60.5
- Material: Rubber/Metal
- Fitting Position: Rear Axle
Incl. VAT 0%
12.82 EUR
- Width of castor bearing surface [mm]: 33
- Inner Diameter [mm]: 28
- Outer Diameter [mm]: 58
- Weight [kg]: 0.228
Incl. VAT 0%
12.41 EUR
- Brake diameter, inside [mm]: 230
- Width [mm]: 50
- Weight [kg]: 2.19
Incl. VAT 0%
23.81 EUR
- Length [mm]: 150
- Length [mm]: 151
- Width [mm]: 61
- Width [mm]: 58
- Test Mark: ECE R90 Approved
Incl. VAT 0%
16.43 EUR
- Width of castor bearing surface [mm]: 33
- Inner Diameter [mm]: 28
- Outer Diameter [mm]: 58
- Weight [kg]: 0.228
Incl. VAT 0%
5.37 EUR
- Thickness [mm]: 60
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 40
- Outer Diameter [mm]: 52
- Material: Rubber/Metal
Incl. VAT 0%
7.43 EUR
- Fitting Position: Front Axle
- Spring Design: Coil Spring
Incl. VAT 0%
23.56 EUR
- Fitting Position: Front Axle
- Wear Warning Contact: with acoustic wear warning
- Brake System: ATE
- Width 1 [mm]: 151
- Width 2 [mm]: 150
Incl. VAT 0%
11.88 EUR
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Number of inlets/outlets: 2
- Suction pipe connector diameter [mm]: 16
- Backflow Connector Thread Size: M16x1,5
Incl. VAT 0%
137.36 EUR
- paired article number: 101278
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
- Fitting Position: Upper
Incl. VAT 0%
42.83 EUR
- Inner Diameter [mm]: 12
- Height [mm]: 10
- Outer Diameter [mm]: 16
Incl. VAT 0%
0.53 EUR
