- Height [mm]: 135
- Weight [kg]: 3.82
- Outer Diameter [mm]: 197
Incl. VAT 0%
31.62 EUR
1-24 of 84
20138 OE number by JOHN DEERE
Total number of products found: 84
| JOHN DEERE | 20138 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Mounting Type: Latching Connection
- Voltage [V]: 12
- Ignition Coil: Block Ignition Coil
- Number of pins: 4
Incl. VAT 0%
43.62 EUR
- Fitting Position: Front Axle
- Spring Design: Coil Spring
Incl. VAT 0%
46.35 EUR
- Length [mm]: 356
- Width [mm]: 262
- Height [mm]: 47
- Filter type: Filter Insert
- for OE number: 1654600Q0G
Incl. VAT 0%
6.94 EUR
Incl. VAT 0%
0.44 EUR
- Number of pins: 4
- Ignition Coil: Connector Type, saw teeth
- Supplementary Article/Info 2: with control unit
Incl. VAT 0%
19.07 EUR
- Length [mm]: 356
- Width [mm]: 262
- Height [mm]: 47
- Filter type: Filter Insert
- for OE number: 1654600Q0G
Incl. VAT 0%
6.08 EUR
- Ignition Coil: Connector Type SAE
- Plug Type: Female
- Number of pins: 4
- Voltage [V]: 12
Incl. VAT 0%
35.81 EUR
- Length [mm]: 360
- Width [mm]: 264
- Height [mm]: 58
- Filter type: Air Recirculation Filter
Incl. VAT 0%
7.21 EUR
- Height [mm]: 10
- Height 2 [mm]: 13.8
- Inner Diameter [mm]: 62
- Outer Diameter [mm]: 78
- Outer Diameter 1 [mm]: 81
Incl. VAT 0%
8.15 EUR
- Width [mm]: 40
- Inner Diameter [mm]: 90
- Outer Diameter [mm]: 147
- Bearing Type: Tapered Roller Bearing
- Fitting Position: Rear Axle Left
Incl. VAT 0%
31.76 EUR
- Thickness [mm]: 50.6
- Inner Diameter [mm]: 12.3
- Outer Diameter [mm]: 50.6
- Material: Rubber/Metal
- Fitting Position: Front Axle Left
Incl. VAT 0%
12.71 EUR
- Length [mm]: 356
- Width [mm]: 262
- Height [mm]: 47
- Filter type: Filter Insert
Incl. VAT 0%
7.43 EUR
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber System: Twin-Tube
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
Incl. VAT 0%
39.11 EUR
- Operating Mode: Electric
- Fitting Position: Rear
- Pump Type: Mono Pump
- Voltage [V]: 12
- Outlet Ø [mm]: 3.4
Incl. VAT 0%
6.54 EUR
- Number of pins: 4
- Number of inlets/outlets: 4
- Ignition Coil: Block Ignition Coil
Incl. VAT 0%
38.12 EUR
- Water pump impeller material: Metal
- Seal Material: Rubber/Metal
- Material: Cast Aluminium
- Number of blades/vanes: 6
- Weight [kg]: 1.91
Incl. VAT 0%
60.02 EUR
- Coil Ignition System: for fully electronic ignition (FI)
- Guarantee: 5 years guarantee
Incl. VAT 0%
51.14 EUR
Incl. VAT 0%
42.28 EUR
- Fitting Position: Front Axle
- Fitting Position: Wheel Side
- Material: Thermoplast
- for OE number: 7701209242
Incl. VAT 0%
7.67 EUR
- Filter type: Filter Insert
- Length [mm]: 360
- Width [mm]: 264
- Height [mm]: 8
- Supplementary Article/Info 2: with pre-filter
Incl. VAT 0%
8.03 EUR
- Length [mm]: 190
- Width [mm]: 96
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 16.5
Incl. VAT 0%
38.46 EUR
- Length [mm]: 189.8
- Width [mm]: 95.6
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
- Thickness 1 [mm]: 16.5
Incl. VAT 0%
33.00 EUR
- Length [mm]: 103
- Material: Thermoplast
- Fitting Position: Wheel Side
- Fitting Position: Front Axle
- Inner Diameter 1 [mm]: 25
Incl. VAT 0%
10.99 EUR
