- Bore Ø [mm]: 23.81
- Piston Diameter [mm]: 23.81
Incl. VAT 0%
56.17 EUR
1-24 of 64
1914 OE number by DS
Total number of products found: 64
| DS | 1914 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Fitting Position: Front Axle
- Length [mm]: 99
- Height [mm]: 61.4
- Thickness [mm]: 15.3
- Test Mark: ECE R90 APPROVED
Incl. VAT 0%
11.66 EUR
- Supplementary Article/Info 2: with anti-squeak plate
- Material: Low-Metallic
- Test Mark: ECE-R90
- WVA Number: 21418
- Thickness [mm]: 14.5
Incl. VAT 0%
18.53 EUR
- Piston Diameter [mm]: 23.81
- Number of connectors: 4
- Material: Cast Iron
- Thread Size 1: M 10 x 1
- Supplementary Article/Info 2: without brake fluid reservoir
Incl. VAT 0%
43.18 EUR
- Width 1 [mm]: 20
- Width 2 [mm]: 20
- Inner Diameter 1 [mm]: 31
- Outer Diameter 1 [mm]: 170
- Height 1 [mm]: 103
Incl. VAT 0%
50.15 EUR
- Internal Thread [mm]: M 14 x 2
- Thread Type: with right-hand thread
- paired article number: 49398913
- Fitting Position: Front Axle Right
Incl. VAT 0%
6.80 EUR
- Weight [kg]: 1
Incl. VAT 0%
20.33 EUR
- Bore Ø [mm]: 24
- Thread Size 1: M10x1
- Thread Size 2: M12x1
Incl. VAT 0%
64.99 EUR
- Thread Size: M14x2
- Thread Type: with right-hand thread
- Cone Size [mm]: 13.2
- paired article number: TA1674
- Fitting Position: Front Axle Right
Incl. VAT 0%
4.95 EUR
- Fitting Position: Front Axle
- Production Number: K4104205
Incl. VAT 0%
11.30 EUR
- Compressor ID: SD6V12
- Compressor Oil: PAG 46
- Refrigerant: R 134a
- Number of ribs: 6
- Belt Pulley Ø [mm]: 109
Incl. VAT 0%
284.71 EUR
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Fitting Position: Rear
- Length [mm]: 55
Incl. VAT 0%
12.14 EUR
- Fitting Position: Front Axle Right
- Length [mm]: 74
- Thread Size 1: M10x1,5
- Thread Size 2: M14x2,0
- replacement in pairs recommended:
Incl. VAT 0%
7.99 EUR
- Fitting Position: Rear
- Fitting Position: Lower
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Height [mm]: 68
Incl. VAT 0%
43.94 EUR
- Fitting Position: Lower
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- Packing Type: Box
Incl. VAT 0%
59.21 EUR
- Width [mm]: 19.8
- Inner Diameter [mm]: 45.2
- Outer Diameter [mm]: 73.4
- Width 2 [mm]: 19.6
Incl. VAT 0%
20.77 EUR
- Width [mm]: 19.6
- Inner Diameter [mm]: 45.2
- Outer Diameter [mm]: 73.4
- Supplementary Article/Info 2: with shaft seal
Incl. VAT 0%
21.26 EUR
- Water pump impeller material: Aluminium
- Seal Material: Paper
- Material: Cast Aluminium
- Number of blades/vanes: 8
- Weight [kg]: 0.848
Incl. VAT 0%
25.82 EUR
- Supplementary Article/Info 2: without lid
- Supplementary Article/Supplementary Info: with gaskets/seals
- Weight [kg]: 0.76
Incl. VAT 0%
34.58 EUR
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- SVHC: No SVHC present!
Incl. VAT 0%
22.13 EUR
- Water pump impeller material: Aluminium
- Seal Material: Paper
- Material: Cast Aluminium
- Number of blades/vanes: 8
- Weight [kg]: 0.848
Incl. VAT 0%
23.55 EUR
- Inner Diameter 1 [mm]: 45.2
- Inner Diameter 2 [mm]: 45.2
- Outer Diameter 1 [mm]: 73.5
- Width 1 [mm]: 20.5
- Width 2 [mm]: 20.5
Incl. VAT 0%
12.01 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with seal
- Impeller Diameter [mm]: 72.5
- Number of blades/vanes: 7
Incl. VAT 0%
29.34 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with seal
- Number of blades/vanes: 7
- Impeller Diameter [mm]: 72.5
- Water Pump Type: for v-ribbed belt use
Incl. VAT 0%
23.05 EUR
