- Length [mm]: 543
- Eject Force [N]: 310
- Stroke [mm]: 220
Incl. VAT 0%
4.02 EUR
1-24 of 84
120162 OE number by CITROËN, CITROËN/PEUGEOT, PEUGEOT
Total number of products found: 84
| CITROËN | 1201.62, 120162 |
| CITROËN/PEUGEOT | 120162 |
| PEUGEOT | 1201-62, 120162, 1201.62 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Number of Teeth 1: 136
- Width 1 [mm]: 25.4
- Water Pump Type: for toothed belt drive
Incl. VAT 0%
70.08 EUR
- Fitting Position: Front Axle
- Test Mark: ECE R-90
- Brake System: Kelsey-Hayes
- Brake Disc Thickness [mm]: 15.3
- Height [mm]: 51.3
Incl. VAT 0%
7.87 EUR
- Production Number: K8501617
Incl. VAT 0%
7.21 EUR
- Number of Teeth: 20
- Pulleys: with belt pulley
- Supplementary Article/Supplementary Info: with seal
- Impeller Diameter [mm]: 68.5
- Belt Pulley Ø [mm]: 59.3
Incl. VAT 0%
35.68 EUR
- Supplementary Article/Supplementary Info: with accessories
- Fitting Position: Front Axle
- Brake System: Kelsey-Hayes
- Length [mm]: 137.8
- Height 1 [mm]: 51.2
Incl. VAT 0%
8.16 EUR
- Article number of the recommended special tool: VKN 1009
- Water pump impeller material: Plastic
- Belt Width [mm]: 25.4
- Supplementary Article/Supplementary Info: with gaskets/seals
- Number of Teeth: 136
Incl. VAT 0%
69.35 EUR
- Water Pump Type: for toothed belt drive
- Water pump impeller material: Plastic
- Supplementary Article/Supplementary Info: with gaskets/seals
- Number of Teeth: 20
Incl. VAT 0%
24.80 EUR
- Eject Force [N]: 310
- Length [mm]: 543
- Stroke [mm]: 220
Incl. VAT 0%
12.74 EUR
- Length [mm]: 100
- Thickness [mm]: 1
- External Thread Size: M8 x 1,25
- Thread Length [mm]: 23
- Spanner Size: 13
Incl. VAT 0%
2.98 EUR
- Operating Mode: Mechanical
- Number of Teeth: 20
- Impeller Diameter [mm]: 69
- Supplementary Article/Supplementary Info: with seal
Incl. VAT 0%
14.23 EUR
- Water pump impeller material: Plastic
- Seal Material: Paper
- Material: Cast Aluminium
- Number of Teeth: 20
- Number of blades/vanes: 8
Incl. VAT 0%
20.99 EUR
- Manufacturer Restriction: VAG
- Width [mm]: 137.8
- Height [mm]: 49
- Thickness [mm]: 15.3
- Wear Warning Contact: not prepared for wear indicator
Incl. VAT 0%
14.93 EUR
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom Clamp
Incl. VAT 0%
108.09 EUR
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom Clamp
- Shock Absorber System: Twin-Tube
Incl. VAT 0%
74.62 EUR
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom Clamp
- Shock Absorber System: Twin-Tube
Incl. VAT 0%
89.75 EUR
- Length [mm]: 137.8
- Width [mm]: 51.2
- Width [mm]: 49
- Test Mark: ECE R90 Approved
- Fitting Position: Front Axle
Incl. VAT 0%
10.44 EUR
- Length [mm]: 543
- Housing length [mm]: 297
- Mounting points diameter [mm]: 18
- Housing Diameter [mm]: 18
- Piston Rod Diameter [mm]: 8
Incl. VAT 0%
15.77 EUR
- Number of Teeth 1: 136
- Width 1 [mm]: 25.4
- Observe service information:
- SVHC: No SVHC present!
Incl. VAT 0%
67.68 EUR
- Length [mm]: 100
- Thickness [mm]: 1
- External Thread Size: M8 x 1,25
- Thread Length [mm]: 23
- Spanner Size: 13
Incl. VAT 0%
3.01 EUR
Incl. VAT 0%
22.40 EUR
- Pulleys: with belt pulley
- Number of Teeth: 20
Incl. VAT 0%
14.75 EUR
- Length [mm]: 100
- Thickness [mm]: 1
- External Thread Size: M8 x 1,25
- Thread Length [mm]: 23
- Spanner Size: 13
Incl. VAT 0%
2.70 EUR
- Operating Mode: Mechanical
- Supplementary Article/Supplementary Info: with seal
- Number of Teeth: 20
- Impeller Diameter [mm]: 69
Incl. VAT 0%
21.25 EUR
