Incl. VAT 0%
5.75 EUR
1-24 of 46
101007 OE number by ALFA ROMEO
Total number of products found: 46
| ALFA ROMEO | 101007, 101 007 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
- Belt Pulley Ø [mm]: 65
- Height 1 [mm]: 23
- Height 2 [mm]: 45
- Weight [kg]: 0.7
Incl. VAT 0%
21.49 EUR
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 56
- Height [mm]: 7
- Radial Shaft Seal Design: B
- Swirl Type: Right-hand Twist
Incl. VAT 0%
0.88 EUR
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 56
- Height [mm]: 7
- Radial Shaft Seal Design: A/BS
- Swirl Type: Right-hand Twist
Incl. VAT 0%
1.73 EUR
- Resistor [Ohm]: 0.55
Incl. VAT 0%
18.85 EUR
- OE recommends exchanging the entire kit:
- Outer Diameter [mm]: 65
- Width [mm]: 23
Incl. VAT 0%
25.73 EUR
Incl. VAT 0%
13.53 EUR
- Material: Cast Iron
- Distance of mounting bores [mm]: 36
- Piston Diameter [mm]: 28.57
- Thread Size: 10 X 1,25
Incl. VAT 0%
8.08 EUR
- Fitting Position: frontal sided
- Inner Diameter 1 [mm]: 40
- Outer Diameter 1 [mm]: 56
- Height 1 [mm]: 7
- Material: ACM (Polyacrylate)
Incl. VAT 0%
1.31 EUR
- Width of castor bearing surface [mm]: 23.5
- Housing material: Aluminium
- Track rollers material: Plastic
- Outer Diameter [mm]: 65
- Operating Mode: Automatic
Incl. VAT 0%
24.41 EUR
- Width [mm]: 40
- Bearing Type: Angular Ball Bearing
- Outer Diameter 1 [mm]: 82
- Outer Diameter 2 [mm]: 85
- Inner Diameter 1 [mm]: 43
Incl. VAT 0%
29.99 EUR
- Outer Diameter [mm]: 65
- Width [mm]: 23.5
- SVHC: No SVHC present!
Incl. VAT 0%
24.47 EUR
- Operating Mode: Mechanical
Incl. VAT 0%
54.86 EUR
- Filter type: Spin-on Filter
- Height [mm]: 122
- Outer Diameter [mm]: 124
- Internal Thread Size: 1 1/2" - 12 UNF
- Seal Diameter [mm]: 104
Incl. VAT 0%
11.33 EUR
- Filter type: Spin-on Filter
- Height [mm]: 122
- Outer Diameter [mm]: 124
- Internal Thread Size: 1 1/2" - 12 UNF
- Sealing Ring Diameter [mm]: 104
Incl. VAT 0%
11.26 EUR
- Manufacturer Restriction: DENSO
- Compressor ID: 10S
- Voltage [V]: 12
- Outer Diameter [mm]: 96
- Inner Diameter 1 [mm]: 40
Incl. VAT 0%
20.75 EUR
- Voltage [V]: 12
- Ignition Coil: Flush-Fitting Pencil Ignition Coils
- Number of pins: 3
Incl. VAT 0%
34.76 EUR
- Width [mm]: 23
- Material: Plastic
- Inner Diameter [mm]: 17
- Outer Diameter [mm]: 65
Incl. VAT 0%
13.74 EUR
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 60
- Length [mm]: 41
Incl. VAT 0%
2.84 EUR
- Manufacturer Restriction: DENSO
- Compressor ID: 10P,10PA,10S
- Compressor ID: 6CA17,6SE,7SB
- Compressor ID: DV-12,DV-13,DV-16,DV
- Compressor ID: SP10,TV12,TV14
Incl. VAT 0%
27.83 EUR
- Outer Diameter [mm]: 16
- External Thread Size: M8
- Thread Length [mm]: 20
- Spanner Size: E8
- Bolt Head-/Nut Design: Male Torx
Incl. VAT 0%
0.89 EUR
- Width [mm]: 23.5
- Diameter [mm]: 65
Incl. VAT 0%
28.70 EUR
- Width [mm]: 102
- Height [mm]: 87
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Weight [kg]: 0.88
Incl. VAT 0%
28.47 EUR
- Diameter [mm]: 28.6
- Material: Cast Iron
- Thread Size: 1x M10x1.25
- Distance of mounting bores [mm]: 36
- paired article number: 62900
Incl. VAT 0%
10.69 EUR
