Incl. VAT 0%
16.20 EUR
1-24 of 47
100054 OE number by SAURER
Total number of products found: 47
| SAURER | 100054 |
OE Number - stands for Original Equipment Number, which refers to the identification number assigned to a complete component or sub-assembly originally installed in a vehicle by the manufacturer. This number helps accurately identify the required part and ensures that it meets the specifications and requirements of the vehicle. The term "Genuine Number" is synonymous with OE Number, denoting the original part number provided by the manufacturer.
Incl. VAT 0%
50.57 EUR
- Inner Diameter [mm]: 20
- Outer Diameter [mm]: 35
- Height [mm]: 10
- Radial Shaft Seal Design: AW
- Swirl Type: Right-hand Twist
Incl. VAT 0%
3.58 EUR
- Length [mm]: 200
- Width [mm]: 170
- Height [mm]: 80
- Number of Teeth: 34
- Number of Teeth: 8
Incl. VAT 0%
263.71 EUR
Incl. VAT 0%
13.53 EUR
- Width [mm]: 25.5
- Weight [kg]: 0.86
- Required quantity: 1
- Outer Diameter [mm]: 60
- Weight [g]: 860
Incl. VAT 0%
36.08 EUR
- Fitting Position: Lower Right
- Fitting Position: Rear
- Mounting Type: Rubber-Metal Mount
- Supplementary Article/Supplementary Info: Torque Support
Incl. VAT 0%
46.45 EUR
- Width [mm]: 26
- Outer Diameter [mm]: 60
- Supplementary Article/Supplementary Info: without holder
Incl. VAT 0%
10.92 EUR
- Fitting Position: Front Axle both sides
- Rod/Strut: Coupling Rod
- External Thread 2 [mm]: M12x1,25
- Length [mm]: 190
- Weight [kg]: 0.396
Incl. VAT 0%
6.44 EUR
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Upper Right
- for OE number: 2462401209
Incl. VAT 0%
30.66 EUR
- Fitting Position: Rear
- Fitting Position: Lower
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 1.15
Incl. VAT 0%
48.12 EUR
- Width of castor bearing surface [mm]: 25.5
- Housing material: Aluminium
- Track rollers material: Plastic
- Outer Diameter [mm]: 60
- Operating Mode: Automatic
Incl. VAT 0%
80.49 EUR
- Core Length [mm]: 570
- Core Width [mm]: 308
- Core Depth [mm]: 34
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
Incl. VAT 0%
42.62 EUR
- Outer Diameter [mm]: 60.2
- Width [mm]: 25.5
- SVHC: No SVHC present!
Incl. VAT 0%
97.25 EUR
- Manufacturer Restriction: DENSO
- Compressor ID: 10PA
- Compressor ID: 7SB / 7SBU
- Voltage [V]: 12
Incl. VAT 0%
13.57 EUR
- Fitting Position: Rear
- Fitting Position: Lower
- Mounting Type: Rubber-Metal Mount
- Weight [kg]: 1.15
- Observe service information:
Incl. VAT 0%
52.30 EUR
- Width [mm]: 26
- Diameter [mm]: 60
- Weight [kg]: 1
- Tensioner Pulley Actuation: Hydraulic
Incl. VAT 0%
11.84 EUR
- Fitting Position: Rear
- Required quantity: 1
Incl. VAT 0%
42.82 EUR
- for OE number: A2462401209
- Fitting Position: Right Rear
- Weight [g]: 1,128
Incl. VAT 0%
34.61 EUR
- Fitting Position: Rear
- Mounting Type: Rubber-Metal Mount
- for OE number: 246 240 12 09
Incl. VAT 0%
26.00 EUR
- Width [mm]: 25.5
- Diameter [mm]: 60
- Outer Diameter [mm]: 60
Incl. VAT 0%
48.94 EUR
- Guarantee: 3 years guarantee
- Frequency Range [MHz]: 433
- Programmed:
- Always compare old and new part (in particular OE No.):
Incl. VAT 0%
21.00 EUR
- Manufacturer Restriction: DENSO
- Compressor ID: 10P,10PA,10S
- Compressor ID: 6CA17,6SE,7SB
- Compressor ID: DV-12,DV-13,DV-16,DV
- Compressor ID: SP10,TV12,TV14
Incl. VAT 0%
27.83 EUR
- Fitting Position: Rear
- Fitting Position: Lower
- Fabrication Number: ZPS-ME-055
Incl. VAT 0%
25.75 EUR
