- Fitting Position: Oil Filter Housing
- Supplementary Article/Info 2: with clamps
Incl. VAT 21%
10.91 EUR
697-720 of 1808
METZGER AUTOTEILE Radiator Hoses – Find the Right Part for Your Car
- Supplementary Article/Info 2: without clamps
- for OE number: 03L121063H
Incl. VAT 21%
4.38 EUR
- Cooling Hose: from heat exchanger to engine
- Forward- /Backflow: for fore-/backflow
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
30.83 EUR
- Fitting Position: Radiator
- Fitting Position: Upper Left
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
27.31 EUR
- Cooling Hose: from expansion tank to engine cooler
- Fitting Position: Upper Right
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
23.57 EUR
- Cooling Hose: from heating valve to water pipe
- Forward- /Backflow: for backflow
- Number of inlets/outlets: 3
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
13.24 EUR
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower Left
- Number of inlets/outlets: 5
- Supplementary Article/Supplementary Info: with quick coupling
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
40.54 EUR
- Fitting Position: Radiator
- Fitting Position: Upper Right
- Number of inlets/outlets: 2
- Supplementary Article/Supplementary Info: with quick coupling
- Supplementary Article/Info 2: with seal ring
Incl. VAT 21%
23.33 EUR
- Cooling Hose: from engine cooler to water pump
- Fitting Position: Lower Left
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
13.08 EUR
- Cooling Hose: from engine to engine cooler
- Fitting Position: Lower Left
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
12.14 EUR
- Fitting Position: Radiator
- Fitting Position: Lower Right
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
18.73 EUR
- Cooling Hose: from water pump to water pipe
- Number of inlets/outlets: 3
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
37.68 EUR
- Cooling Hose: from expansion tank to distributor
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
Incl. VAT 21%
14.86 EUR
- Cooling Hose: Input, radiator
- Fitting Position: Upper Right
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
28.08 EUR
- Fitting Position: Radiator
- Fitting Position: Upper Left
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
15.62 EUR
- Cooling Hose: from coolant regulator housing to engine cooler
- Fitting Position: Upper Left
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
23.29 EUR
- Cooling Hose: Expansion Tank to Engine
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
24.13 EUR
- Cooling Hose: from heating valve to water pipe
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Check OE number:
Incl. VAT 21%
7.82 EUR
- Cooling Hose: from coupling piece to heat exchanger
- Forward- /Backflow: for foreflow
- Heating/Cooling: with vent hole
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Check OE number:
Incl. VAT 21%
16.19 EUR
- Fitting Position: Radiator
- Fitting Position: Upper Left
- Fitting Position: Intake Side
- Number of inlets/outlets: 2
Incl. VAT 21%
18.40 EUR
- Forward- /Backflow: for backflow
- Number of inlets/outlets: 2
- Cooling Hose: Piping to heat exchanger
Incl. VAT 21%
7.08 EUR
- Fitting Position: Radiator
- Fitting Position: Upper Left
- Fitting Position: Intake Side
- Emission Standard: Euro 6
- for manufacturer exhaust norm: Euro 6d
Incl. VAT 21%
19.64 EUR
- Cooling Hose: from heat exchanger to engine
- Fitting Position: Lower
- Number of inlets/outlets: 2
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
Incl. VAT 21%
21.85 EUR
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Cooling Hose: from coolant regulator housing to heat exchanger
- Fitting Position: Upper
- Forward- /Backflow: for backflow
- Supplementary Article/Supplementary Info: with quick coupling
Incl. VAT 21%
22.24 EUR
